NEW VERSION AVAILABLE! HC02!
RF DC MOTOR CONTROLLER - HC01
PRE-ORDER ONLY!
- the module is suitable to command a DC motor (analog locomotive) with Radiofrequency (433-473 MHz) remote for a long distance
- don't need an expensive command station
- suitable for H0, OO or garden layout
- you will never need to clean a track or wheels, just install the battery into the locomotive along with Receiver
- range about 1 mile/1,6 km (open area)
Transmitter:
- the loco speed with a rotary encoder
- direction/Stop with rotary encoder's push-button- loco address selection with push button
- 2 pushbuttons control 4 universal outputs (lights, smoke generator, horn, coupler)- direction change protection (direction change is allowed only if loco stopped)
- 10 locomotives simultaneously with one Transmitter
- 7 segments display - shows the locomotive address
- 9V battery power (not included)
Receiver:
- PWM (Pulse-width modulation) speed control
- 1,5 A output (2A peak for 10 seconds)- up to 20 volts power supply
- 4 universal outputs
- the 4th output is active if loco moves on (smoke generator, warning flasher, sound)
- front and rear light outputs (depends on direction)
- size: 40 x 20 mm (1,6” x 0,8”)
- covered with heat-shrink foil
The address of the Receiver can be modified by soldering iron. The default address is 1. Let me know if you would like a different address. If you order more items the addresses will be consecutive.
top of page
0,00€Ár
bottom of page